MENU

Letter of the Federal Customs Service of Russia No. 06-42/59089 dated 02.12.2011 about application of the reference book "Documents and information used for the classification of goods according to TN VED TS"

The Department of Commodity Nomenclature of the Federal Customs Service of Russia has developed a reference book "Documents and information used to classify goods according to TN FEA TS". The directory contains a list of information confirming the classification code of the goods according to CN FEA TS, and documents containing this information.

Responsible for the content of the Directory is UTN. At present, the Directory contains 229 items for goods that are the most difficult to classify according to the FEACN of the CU.

Designed for use in Customs version 1.24.17 KPS "Inspector GR"as part of the AIS "AIST-M" provides the ability to use the Directory as a contextual hint to the inspector when checking the correctness of the classification according to the FEACN of the CU before the release of goods.

The information contained in the Directory is advisory in nature and is used to make a reasonable decision on the correctness of the product code declared by the declarant, taking into account the information in column 31 DT and submitted documents. The inspector may refer to this information in case of difficulty in verifying the correct classification of goods. The reference book can also be used when preparing a requirement for the declarant to submit additional documents.

If there are sufficient documents and information to classify the goods, the request for additional documents specified in the Directory is not required.

Expect data loading and formatting
List of information confirming the classification code of the goods according to the FEACN of the CU, and documents containing this information.
Sign TN_VED CODE Name Required Information Recommended Information ID
3002109509 Human blood and animal blood 1. The dosage form of an essential and essential drug (VED) (for example, injection solution, intravenous solution). 2. Name of individual package (vial, ampoule, jar), amount of vital and essential drugs in the individual 1. Information about the registration of the medicinal product (preparation) 2. Information about the license issued by the authorized body. 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 67
3002109900 Human blood and animal blood 1. The dosage form of an essential and essential drug (VED) (for example, injection solution, intravenous solution). 2. Name of individual package (vial, ampoule, jar), amount of vital and essential drugs in the individual 1. Information about the registration of the medicinal product (preparation) 2. Information about the license issued by the authorized body. 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 68
305200000 Fish and crustaceans 1. The name of the fish and its type (Latin name). 2. Type of cutting (eg fillets, pieces). 3. Type of processing (for example, fresh, chilled, ice cream) 4. Presence of spices, other ingredients. 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 5
440310000 Wood products in the rough, whether or not bark or sapwood removed, or roughly squared or unlogged 1. Name and purpose of timber, breed and type of wood, Latin name. 2. Technology for obtaining timber, including the presence of surface mechanical treatment (in accordance with the texts of sub-subheadings). 3. Timber dimensions 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 144
8703211091 Passenger cars and other motor vehicles vehiclesintended primarily for the transport of persons (other than motor vehicles of heading 8702), including vans and racing cars 1. Appearance. 2. Moment of release of t.s. 3. Engine type (gasoline/diesel). 4. The working volume of the engine cylinders. 5. Gross weight tf. 6. Carrying capacity. 7. Maximum driving speed. 8. Number of seats including the driver. nine. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. Vehicle Type Approval 268
1 300660100 Chemical contraceptives based on hormones or spermicides 1. The main active ingredient. 2. Dosage form (eg, injection solution, intravenous solution, tablets). 3. For a vital and essential drug (VED) - a barcode. 4. Dosage. 5. Individual 1. Information on the registration of the medicinal product (drug). 2. Instructions for use. 3. Extract from the state register of medicines and pharmaceutical substances. 73
1 681599000 Mineral products 1. Quantitative and qualitative composition of the material of the product (in wt.%), indicating the names of minerals. 2. The degree of processing of the material. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for product. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 169
1 0201-0204 Meat of cattle, pork, lamb, goat meat, fresh, chilled or frozen 1. Name of the part of the carcass or cut. 2. Description of cut boundaries. 3. Availability of a license. 1. Technological instructions. 2. Acts of examinations. or 3. Test reports or 4. Certificates of laboratory analysis. 1
1 0401-0404 Dairy produce 1. Name. 2. Mass fraction of milk fat (wt.%). 3. Net weight (net volume) in the primary packaging. 4. The presence of added sugar or other sweeteners. 5. Protein content (for 0404). 6. Purpose (for baby food) (for 0401 2 1. TU. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 8
1 110100-1104 Cereals, flour and granules from grains and cereals, cereal grains and cereal germ 1. Species composition of flour and cereal products. 2. Starch content (wt.%). 3. Ash content (wt.%). 4. Degree of passage through a metal mesh sieve with a corresponding mesh size of 315 µm or 500 µm (for 1101 and 1102) or 2 mm or 1,25 ( 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 14
1 1105-1106 Fine and coarse flour 1. Species composition of flour-grinding products. 2. Physical state (in the form of flour, powder, flakes, granules). 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 15
1 1501-1506000000 Fats and oils of animal origin 1. Type of fat (for example, pork, cattle, fish). 2. Type of processing (unrefined, refined). 3. Application (for example, for industrial production, for food production). 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 5. TU 16
1 1507-1515 Vegetable fats and oils 1. Type of vegetable fat or oil (for example, soybean, peanut, etc.). 2. Fatty acid composition. 3. Physical state (solid or liquid). 4. Raw or processed. 5. Extracted or obtained pressing. 6. Type of processing. 7. Soda 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 5. TU 17
1 1516 Animal or vegetable fats and oils and their fractions, whether wholly or partially hydrogenated, interesterified, re-esterified or elaidinized, whether or not refined, but not further processed 1. Type of vegetable or animal fat or oil (for example, fish oil, soy, peanut, etc.). 2. Type of processing (for example, fully hydrogenated). 3. The content of free fatty acids (wt.%). (for 1516 20 960) 5. Fatty acid composition 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 5. TU 18
1 1517 Margarine and other edible fats or oils 1. Mass fraction of total fat (wt.%). 2. Mass fraction of products of heading 0405 (butter, milk spread or other milk fats). 3. Physical state (liquid, paste, etc.). 4. Application (for example, for the production of products, 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 5. TU 19
1 16021000 Homogenized finished products 1. Mass fraction of meat, meat by-products or blood (wt.%). 2. Net weight of goods without primary packaging (g). 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 20
1 170112-170114 Cane or beet sugar in solid state The content of sucrose in the dry state (wt.%) when determined by the polarimetric method. 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 21
1 170199100 Cane or beet sugar in solid state The content of sucrose in the dry state (wt.%) when determined by the polarimetric method. 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 22
1 1803 Cocoa paste, whether or not defatted Fat content (wt.%). 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 23
1 180610 Cocoa powder with added sugar or other sweeteners Mass fraction of sucrose or other sweeteners (wt.%). 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 24
1 180620 Other prepared articles, in briquettes, plates or slabs, weighing more than 2 kg, or in liquid, paste, powder, granular or similar form in containers or in immediate packings with a content of more than 2 kg 1. Form or type (for example, briquette, paste, granules). 2. For products in the form of a briquette, plate or tile: weight (kg) of one briquette, plate or tile. 3. For products in liquid, paste, powder or granular form: mass (kg) in unit 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 25
1 2003 Mushrooms and truffles, prepared or preserved otherwise than by vinegar or acetic acid Type of preservation or method of preparation. 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 5. TU 26
1 2009 Fruit juices (including grape must) and vegetable juices, non-fermented and free of alcohol, with or without sugar or other sweeteners 1. Type of processing (for example, frozen, concentrated, non-concentrated). 2. Brix number. 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 27
1 207 Meat of cattle, pork, lamb, goat meat, fresh, chilled or frozen 1. Name of the part of the carcass or cut. 2. Description of cut boundaries. 3. Availability of a license. 1. Technological instructions. 2. Acts of examinations. or 3. Test reports or 4. Certificates of laboratory analysis. 2
1 210111 Extracts, essences and concentrates of coffee Mass fraction of coffee in the product in terms of dry matter (wt.%). 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 28
1 2106909804 Edible mixtures or preparations of animal or vegetable fats or oils or their fractions, containing more than 15 wt. % milk fat 1. Mass fraction of total fat (wt.%) and moisture (wt.%). 2. Mass fraction of milk fats (wt.%). 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 4. TU 29
1 220410 Grape wines, natural, including fortified 1. Percentage of ethyl alcohol by volume (vol.%). 2. Sugar content (g/l). 3. Type of wine (white, rose or red). 4. High quality or ordinary. 5. Sparkling or still 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 30
1 220421 Grape wines, natural, including fortified 1. Percentage of ethyl alcohol by volume (vol.%). 2. Sugar content (g/l). 3. Type of wine (white, rose or red). 4. High quality or ordinary. 5. Sparkling or still 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 31
1 220429 Grape wines, natural, including fortified 1. Percentage of ethyl alcohol by volume (vol.%). 2. Sugar content (g/l). 3. Type of wine (white, rose or red). 4. High quality or ordinary. 5. Sparkling or still 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 32
1 2205 Other vermouths and grape natural wines with added vegetable and aromatic substances 1. Actual ethanol content by volume (vol.%). 2. Capacity (l). 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 33
1 220600 Other fermented beverages (e.g. cider, perry or pear cider, honey drink). Mixtures of fermented beverages and mixtures of fermented beverages and non-alcoholic beverages, not elsewhere specified or included The actual content of ethyl alcohol by volume (vol.%). 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 34
1 2515 Stone for monuments and construction 1. The size of the stone. 2. Type of mineral. 3. Type of processing of the goods (for example, crushing, screening, roasting). 4. Method of receipt. The manufacturer's technical documentation containing a description of the technology for the production of goods, or an expert opinion (examination certificate). 35
1 2516 Stone for monuments and construction 1. The size of the stone. 2. Type of mineral. 3. Type of processing of the goods (for example, crushing, screening, roasting). 4. Method of receipt. The manufacturer's technical documentation containing a description of the technology for the production of goods, or an expert opinion (examination certificate). 36
1 2528000000 Borates natural 1. The content (wt.%) of boric acid in terms of dry product. 2. Type of processing of the goods (for example, crushing, screening, roasting). 3. Method of receipt. 1. Expert opinion (examination certificate) or a quality passport for the product, or a certificate of analysis of the product. 2. The manufacturer's technical documentation containing a description of the technology for the production of goods, or an expert's opinion (examination certificate). 37
1 2529210000 Fluorspar 1. The content of calcium fluoride. 2. Type of processing of the goods (for example, crushing, screening, roasting). 3. Method of receipt. 1. Expert opinion (examination certificate) or a quality passport for the product, or a certificate of analysis of the product. 2. The manufacturer's technical documentation containing a description of the technology for the production of goods, or an expert's opinion (examination certificate). 38
1 2529220000 Fluorspar 1. The content of calcium fluoride. 2. Type of processing of the goods (for example, crushing, screening, roasting). 3. Method of receipt. 1. Expert opinion (examination certificate) or a quality passport for the product, or a certificate of analysis of the product. 2. The manufacturer's technical documentation containing a description of the technology for the production of goods, or an expert's opinion (examination certificate). 39
1 2530 Minerals not elsewhere specified or included 1. Content (wt.%) of chemically bound iron. 2. Type of mineral. 3. Type of processing of the goods (for example, crushing, screening, roasting). 4. Method of receipt. 1. Expert opinion (examination certificate) or a quality passport for the product, or a certificate of analysis of the product. 2. The manufacturer's technical documentation containing a description of the technology for the production of goods, or an expert's opinion (examination certificate). 40
1 26 Ores, slag and ash 1. Type of processing (such as crushing, grinding, separation, etc.) 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 41
1 2701 Hard coal, brown coal 1. Limiting yield of volatile substances (in%) 2. Limiting calorific value (kcal / kg) Expert opinion (examination certificate) or a quality passport for the product, or a certificate of analysis of the product. 42
1 2702 Hard coal, brown coal 1. Limiting yield of volatile substances (in%) 2. Limiting calorific value (kcal / kg) Expert opinion (examination certificate) or a quality passport for the product, or a certificate of analysis of the product. 43
1 270400 Coke and semi-coke 1. Purpose and method of use of the goods. Expert opinion (examination act) or technical specifications (organization standard). 44
1 2707 Oils and other products of high-temperature distillation of coal tar 1. The content of the main substance (wt.%). 2. Fractional composition. 3. Purpose of goods. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 45
1 270900 Crude oil and petroleum products 1. Fractional composition. 2. Method of receipt. 3. Place of production. 4. Density (kg/m3). 5. Sulfur content (wt.%). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 46
1 2710 Oil and oil products, except crude 1. Fractional composition. 2. Production method 3. Sulfur content (wt.%). 4. Initial boiling point. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 47
1 2710124100-2710125900 Motor gasolines 1. Type of gasoline (for example, automobile). 2. Lead content (g/l). 3. Octane number. 4. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 48
1 2710194200 gas oils 1. Sulfur content (wt.%). 2. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 49
1 2710194800 gas oils 1. Sulfur content (wt.%). 2. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 50
1 271019510 Liquid fuels 1. Initial boiling point. 2. Flash point in a closed cup. 3. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 51
1 271019550 Liquid fuels 1. Initial boiling point. 2. Flash point in a closed cup. 3. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 52
1 271019620 Liquid fuels 1. Initial boiling point. 2. Flash point in a closed cup. 3. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 53
1 271019640 Liquid fuels 1. Initial boiling point. 2. Flash point in a closed cup. 3. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 54
1 271019660 Liquid fuels 1. Initial boiling point. 2. Flash point in a closed cup. 3. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 55
1 271019680 Liquid fuels 1. Initial boiling point. 2. Flash point in a closed cup. 3. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 56
1 2710198200 Engine oils 1. Type and purpose of oil (for example, motor winter, motor summer). 2. Oil base (eg synthetic, semi-synthetic, mineral). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 57
1 2710201100 gas oils 1. Sulfur content (wt.%). 2. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 58
1 2710201900 gas oils 1. Sulfur content (wt.%). 2. Fractional composition. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 59
1 2711 Petroleum gases 1. The content of the main substance (wt.%). 2. Fractional composition. 3. Purpose of goods. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Specifications (organization standard). 60
1 2844 radioactive substances 1. Specific radioactivity (Bq/g). 2. Number of kilograms of uranium (kg U). 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Specifications (organization standard). 61
1 2936 Vitamins 1. Release form (for example, tablets, capsules, lozenges. 2. Dosage. 3. Name of individual packaging (vial, ampoule, jar). 4. Quantity in individual packaging, number of individual packagings in consumer packaging. 5. Kit 1. Information on the registration of the medicinal product (drug). 2. Information about the license issued by the authorized body. 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 62
1 300210100 Human blood and animal blood 1. The dosage form of an essential and essential drug (VED) (for example, injection solution, intravenous solution). 2. Name of individual package (vial, ampoule, jar), amount of vital and essential drugs in the individual 1. Information about the registration of the medicinal product (preparation) 2. Information about the license issued by the authorized body. 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 63
1 3002109100 Human blood and animal blood 1. The dosage form of an essential and essential drug (VED) (for example, injection solution, intravenous solution). 2. Name of individual package (vial, ampoule, jar), amount of vital and essential drugs in the individual 1. Information about the registration of the medicinal product (preparation) 2. Information about the license issued by the authorized body. 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 64
1 3002109501 Human blood and animal blood 1. The dosage form of an essential and essential drug (VED) (for example, injection solution, intravenous solution). 2. Name of individual package (vial, ampoule, jar), amount of vital and essential drugs in the individual 1. Information about the registration of the medicinal product (preparation) 2. Information about the license issued by the authorized body. 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 65
1 3002109509-3002109900 Serum immune 1. Quantitative and qualitative composition of each reagent (kit component). 2. Purpose and method of application. 3. Packing method. 1. Instructions for use. 66
1 300220000-300290 Human blood and animal blood 1. The dosage form of an essential and essential drug (VED) (for example, injection solution, intravenous solution). 2. Name of individual package (vial, ampoule, jar), amount of vital and essential drugs in the individual 1. Information about the registration of the medicinal product (preparation) 2. Information about the license issued by the authorized body. 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 69
1 3003 Medicinal products 1. The main active substance, excipients. 2. Dosage form. 2. For a vital and essential drug (VED) - a barcode. 1. Information on the registration of the medicinal product (drug). 2. Information about the license issued by the authorized body (if any). 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 70
1 3004 Medicinal products 1. The main active substance, excipients. 2. Dosage form (eg, injection solution, intravenous solution, tablets). 3. For a vital and essential drug (VED) - a barcode. 4. 1. Information on the registration of the medicinal product (drug). 2. Information about the license issued by the authorized body (if any). 3. Instructions for use. 4. Extract from the state register of medicines and pharmaceutical substances. 71
1 3006300000 Contrast preparations for radiographic examinations. Diagnostic reagents intended for administration to patients 1. The main active ingredient. 2. Dosage form (eg, injection solution, intravenous solution, tablets). 3. For a vital and essential drug (VED) - a barcode. 4. Dosage. 5. Individual 1. Information on the registration of the medicinal product (drug). 2. Instructions for use. 3. Extract from the state register of medicines and pharmaceutical substances. 72
1 304 Fish and crustaceans 1. The name of the fish and its type (Latin name). 2. Type of cutting (eg fillets, pieces). 3. Type of processing (for example, fresh, chilled, ice cream) 4. Presence of spices, other ingredients. 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 3
1 305 Fish and crustaceans 1. The name of the fish and its type (Latin name). 2. Type of cutting (eg fillets, pieces). 3. Type of processing (for example, fresh, chilled, ice cream) 4. Presence of spices, other ingredients. 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 4
1 306 Fish and crustaceans 1. The name of the fish and its type (Latin name). 2. Type of cutting (eg fillets, pieces). 3. Type of processing (for example, fresh, chilled, ice cream) 4. Presence of spices, other ingredients. 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 6
1 307 Mollusks and aquatic invertebrates 1. Name of a mollusk or aquatic invertebrate and its species (Latin name). 2. Live or processed. 3. For oysters - weight (g) of each. 4. Type of processing (eg fresh, chilled, frozen, dried, salted or in brine). 5. Cash 1. Technological instructions. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 7
1 31 fertilizers 1. Packaging method. 2. Quantitative and qualitative composition (wt.%). 1. Instructions for use. 2. Certificate of analysis of goods or quality passport for goods, or expert opinion (examination certificate). 74
1 3208 Paints and varnishes based on synthetic polymers 1. The chemical name of the polymer that is part of the paint (lacquer). 2. Quantitative and qualitative composition (wt.%). 3. Packaging method. 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Instructions for use or information from the labels (packaging) of the product. 75
1 3209 Paints and varnishes based on synthetic polymers 1. The chemical name of the polymer that is part of the paint (lacquer). 2. Quantitative and qualitative composition (wt.%). 3. Packaging method. 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Instructions for use or information from the labels (packaging) of the product. 76
1 330300-3307 Perfumes and cosmetics 1. Purpose and method of application. 2. Packaging method. 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Instructions for use or information from the labels (packaging) of the product. 77
1 3402 Surfactants 1. Quantitative and qualitative composition (wt.%). 2. Packaging method. 3. Surface tension of water (N/m). 1. Expert opinion (examination report) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Specifications (standard of the organization) or information from the labels (packaging) of the goods. 78
1 3404 Waxes, artificial and prepared waxes 1. Dropping point. 2. Viscosity as measured by rotational viscometry at a temperature of 10 degrees C above the dropping point. 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Specifications (organization standard). 79
1 3502 Albumins Other protein substances. Dextrins and modified starches. 1. Quantitative and qualitative composition (wt.%). 2. Method of production. 1. Expert opinion (examination report) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Specifications (organization standard) or production technology from the manufacturer of the goods. 80
1 3504 Albumins Other protein substances. Dextrins and modified starches. 1. Quantitative and qualitative composition (wt.%). 2. Method of production. 1. Expert opinion (examination report) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Specifications (organization standard) or production technology from the manufacturer of the goods. 81
1 3505 Albumins Other protein substances. Dextrins and modified starches. 1. Quantitative and qualitative composition (wt.%). 2. Method of production. 1. Expert opinion (examination report) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Specifications (organization standard) or production technology from the manufacturer of the goods. 82
1 3506 Adhesives 1. Quantitative and qualitative composition (wt.%). 2. The purpose and function of each component in the composition of the adhesive. 3. Way of packaging of each component. 1. Expert opinion (examination report) or product analysis certificate, or product quality passport, or product safety data sheet. 2. Specifications (organization standard) or production technology from the manufacturer of the goods. 3. Information with etiquette 83
1 3701-3703 Photo and film products 1. Length (m) and width (mm) of the goods. 1. Specifications (standard of the organization) or information from the labels (packaging) of the goods. 84
1 3706 Photo and film products 1. Length (m) and width (mm) of the goods. 1. Specifications (standard of the organization) or information from the labels (packaging) of the goods. 85
1 380910 Finishing agents based on starchy substances 1. The content of starchy substances (wt.%). 2. Scope 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet, or technical specifications (organization standard), or information from product labels (packaging). 86
1 381400 Solvents and diluents complex organic 1. The content of petroleum products (wt.%). 2. Quantitative and qualitative composition. 3. Scope. 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet, or technical specifications (organization standard), or information from product labels (packaging). 87
1 3822000000 Diagnostic or laboratory reagents 1. Quantitative and qualitative composition of each reagent (kit component). 2. Purpose and method of application. 3. Packing method. 1. Instructions for use. 88
1 3824 Chemical products and preparations, not elsewhere specified or included 1. The presence of substances with nutritional value. 2. Quantitative and qualitative composition. 3. Scope. 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet, or technical specifications (organization standard), or information from product labels (packaging). 89
1 3901-3903 Polymers in primary forms 1. The content of monomer units (wt.%). 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet, or technical specifications (organization standard). 90
1 3904100091 Paste-forming PVC emulsion, microsuspension and PVC-extender resins 1. Predominant resin particle size (µm). 2. Type of polymerization (for example, suspension, emulsion, etc.). 3. Mass fraction of sulfate ash. 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet, or technical specifications (organization standard). 91
1 3905-3914 Polymers in primary forms 1. The content of monomer units (wt.%). 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet, or technical specifications (organization standard). 92
1 3916 Shaped profiles 1. Manufacturing method. 2. Scope 3. Availability of materials other than plastic (eg gaskets, seals). 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet, or technical specifications (organization standard). 2. Technical documentation of the manufacturer containing a description of the technology 93
1 3917-3926 Plastic products 1. The name of the polymer from which the product is made. 2. Technology of production of goods. 1. Expert opinion (examination certificate) or product analysis certificate, or product quality passport, or product safety data sheet, or technical specifications (organization standard). 2. Manufacturer's technical documentation containing a description of the technology p 94
1 3918 Plastic wall and floor coverings 1. Surface decoration method. 2. Manufacturing method (presence of a substrate). 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 95
1 3919 Self-adhesive films, sheets, plates, strips 1. The composition of the adhesive layer. 2. The amount of plasticizers in the composition of the polymer material. 3. Media roll width. 4. Appearance. 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 96
1 3920 Boards, sheets, foils, strips or strips of plastics, non-porous, non-reinforced, non-laminated, unsupported, not similarly bonded to other materials 1. The structure of the polymer material (for example, non-reinforced). 2. Product thickness (mm). For products consisting of several layers of polymers - the thickness of each polymer layer. 3. The shape and size of the product (for example, a plate of 1m2), for products in rolls - width 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 97
1 392010 Plates, sheets, films, strips or strips, of ethylene polymers, non-porous, non-reinforced, non-laminated, unsupported, not similarly bonded to other materials 1. Specific gravity of polyethylene. 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 98
1 392020 Plates, sheets, films, strips or tapes, of propylene polymers, non-porous, non-reinforced, non-laminated, unsupported, not similarly bonded to other materials 1. Oriented state of the polymer (non-oriented, biaxially oriented). 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 99
1 392043 Plates, sheets, films, strips or tapes, of vinyl chloride polymers, non-porous, non-reinforced, non-laminated, unsupported, not similarly bonded to other materials 1. The amount of plasticizers in the polymer material (wt.%). 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 100
1 392049 Plates, sheets, films, strips or tapes, of vinyl chloride polymers, non-porous, non-reinforced, non-laminated, unsupported, not similarly bonded to other materials 1. The amount of plasticizers in the polymer material (wt.%). 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 101
1 3921 Plates, sheets, films or strips of plastics, other 1. The structure of the polymer material (for example, non-reinforced). 2. Product thickness (mm). For products consisting of several layers of polymers - the thickness of each polymer layer. 3. The shape and size of the product (for example, a plate of 1m2), for products in rolls - width 1. Expert opinion (examination certificate) or technical specifications (organization standard). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 102
1 3922100000 Bathtubs, showers, sinks and wash basins, plastic 1. Indicate the presence or absence of a compressor. 1. Instructions for use. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 103
1 3923100000 Boxes, crates, baskets and similar articles 1. Appointment. 2. The presence of a tray (inserts for mounting one or two discs) in a CD box. 3. The number of CDs the box is designed to hold. 4. The color of the box and tray (if any) in the CD box. five. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 104
1 3923301010 Preforms The volume of the resulting bottle (l). 1 Manufacturer's technical documentation containing a description of the technology for the production of goods. 105
1 3923301019 Preforms The volume of the resulting bottle (l). 1 Manufacturer's technical documentation containing a description of the technology for the production of goods. 106
1 3925 Plastic building parts 1. Type of processing. 2. Design features. 1. Instructions for use. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 107
1 4001-4005 Primary forms of rubber and rubber 1. The content of monomer units (wt.%). 2. The presence of vulcanizing agents, plasticizers, fillers, accelerators, activators, etc. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 108
1 4006-4010 Rubber products 1. The name of the polymeric material from which the product is made. 2. Specify the type of rubber (vulcanized or unvulcanized). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 109
1 4011610000-4011990000 Tires and tyres, other 1. Profile width, fit diameter, tire diameter, maximum speed for which the tire is designed. 2. Tread pattern (eg herringbone). 1. Marking tires. 2. Technical documentation. 110
1 4012130001 Tires retreaded or used for use in aviation 1. Marking (size, model). 2. What type of aircraft is the tire intended for. 1. Technical documentation. 111
1 4012130009 Tires retreaded or used for use in aviation 1. Marking (size, model). 2. What type of aircraft is the tire intended for. 1. Technical documentation. 112
1 4013 Rubber products 1. The name of the polymeric material from which the product is made. 2. Specify the type of rubber (vulcanized or unvulcanized). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 113
1 4014 Rubber products 1. The name of the polymeric material from which the product is made. 2. Specify the type of rubber (vulcanized or unvulcanized). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 114
1 4015190000 Clothing and clothing accessories 1. The presence of textile materials that cover or duplicate the rubber layer in the product (one-sided or two-sided coating). 2. The structure of the rubber layer (dense or porous). 3. Finishing textile material (coloring, the presence of a pattern, other image 1. Expert opinion (examination report). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 3. Information about the registration of a medical device. 115
1 4015190000 Other clothing and clothing accessories 1. The presence of textile materials that cover or duplicate the rubber layer in the product (one-sided or two-sided coating). 2. The structure of the rubber layer (dense or porous). 3. Finishing textile material (coloring, the presence of a pattern, other image 1. Expert opinion (examination report). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 3. Information about the registration of a medical device. 116
1 4015900000 Clothing and clothing accessories 1. The presence of textile materials that cover or duplicate the rubber layer in the product (one-sided or two-sided coating). 2. The structure of the rubber layer (dense or porous). 3. Finishing textile material (coloring, the presence of a pattern, other image 1. Expert opinion (examination report). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 3. Information about the registration of a medical device. 118
1 4015900000 Other clothing and clothing accessories 1. The presence of textile materials that cover or duplicate the rubber layer in the product (one-sided or two-sided coating). 2. The structure of the rubber layer (dense or porous). 3. Finishing textile material (coloring, the presence of a pattern, other image 1. Expert opinion (examination report). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 3. Information about the registration of a medical device. 117
1 4016910000 Floor coverings and rugs 1. The presence of textile materials, textile pile. 2. A method for manufacturing a textile material and a method for bonding a textile material/pile with a rubber layer. 3. Dimensions: length, width, thickness (mm). 1. Expert opinion (examination report). 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 119
1 4017 Rubber products 1. The name of the polymeric material from which the product is made. 2. Specify the type of rubber (vulcanized or unvulcanized). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 120
1 405 Butter and other fats and oils made from milk. Milk pastes 1. Mass fraction of milk fat (wt.%). 2. Mass fraction of moisture (wt.%). 3. The content of dry residue (wt.%). 4. Recipe. 1. TU. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 9
1 406 Cheese and curd 1. Type of cheese. 2. The name of the cheese. 3. Mass fraction of milk fat (wt.%). 4. Net weight (net volume) in primary packaging (for 0406 10). 5. Purpose (for baby food) (for 0406 10). 6. Recipe. 7. Moisture content (for 0406 90). 1. TU. 2. Acts of examinations. or 3. Test reports. or 4. Certificates of laboratory analysis. 10
1 4101 Raw hides and skins of bovine (including buffalo) or equine animals 1. Name and type of animals from which the skins are obtained. 2. For the whole hide: weight in dry, dry-salted or fresh, wet-salted or other canned form (in kg), preservation method. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 121
1 4102 Raw skins of sheep or skins of lambs 1. Name and type of animals from which the skins are obtained. 2. For skins without wool: preservation methods. 3. The presence of additional processing of the skin, for example, pre-tanning. 4. Animal skin area (m2). 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 122
1 4103 Other raw hides 1. Name and type of animals from which the skins were obtained 2. Methods of preservation and processing of skins (for example, wet-salting). 3. The presence of hairline. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 123
1 4104 Tanned or crust skins of cattle (including buffalo) or equines 1. Name and type of animals from which the skins are obtained. 2. Methods of working hides, including pre-tanning, tanning, sanding, splitting (specify face or split) or other division. 3. Product condition (wet (for example, chrome-plated 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 124
1 4105 Tanned or crust skins of sheep or lambs, without wool 1. Name and type of animals from which the skins are obtained. 2. Methods of working leather, including the method of tanning, grinding, doubling (indicate the front part or split) or other division. 3. The condition of the product (damp (such as semi-finished chrome) or 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 125
1 4106 Tanned leather or crust hides of other animals, 1. Name and type of animals from which the skins are obtained. 2. Methods of processing leather (technology), including the method of tanning, grinding, doubling (indicate the front part or split) or other division. 3. Product condition (damp (for example, chrome half 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 126
1 4107 Leather further treated after tanning or in the form of leather crust 1. Name and type of animals from which the skins are obtained. 2. Methods of working leather, including the method of tanning, grinding, doubling (indicate the front part or split) or other division. 3. The presence of additional processing of the skin after tanning. 4.Pro status 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 127
1 4112000000 Leather further prepared after tanning or crusting, including parchment-dressed, from sheepskins or lambskins, 1. Name and type of animals from which the skins are obtained. 2. Leather manufacturing technology and additional methods of processing skins. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 128
1 4113 Leather further prepared after tanning or crusting, including parchment-dressed leather, from hides of other animals 1. Name and type of animals from which the skins are obtained. 2. The presence of additional processing of the skin after tanning. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 129
1 4114 Suede (including combined suede). Lacquered leather and laminated lacquered leather. Metallized leather 1. Technology for obtaining and applying a coating, coating composition. 2. For leather: the presence of a coating indicating the materials and their thicknesses (mm). 3. For suede: the name and type of animal from which the skins were obtained. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 130
1 4115 Composite leather, based on genuine leather or leather fibers, in plates, sheets or strips or tapes, whether or not in rolls. Trimmings and other wastes of natural or composite leather, unsuitable for the manufacture of leather goods. Kozheve 1. Description of manufacturing technology. 2. Quantitative and qualitative composition of composite leather. If there are several layers, the composition is indicated for each layer. 3. Description of the type in which composite leather is presented (in plates, sheets 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 131
1 4201000000 Saddlery and harness for all animals (including harnesses, reins, knee pads, muzzles, blankets, saddlebags, dog blankets and similar products) 1. Design features. 2. Purpose of the goods. 3. Quantitative and qualitative composition. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 132
1 4202 Handbags, suitcases, ladies' suitcases, cases for business papers, briefcases, school bags, cases for glasses, binoculars, cameras, musical instruments, guns, holsters and similar articles. Travel bags, thermos bags for food products 1. Name and description indicating design features. 2. The purpose of the goods (for example, a sports bag). 3. Qualitative and quantitative composition, thickness, purpose of the front surface material. 4. Durability of the product (for example, for long 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 133
1 4203 Articles of apparel and clothing accessories, made of genuine leather or composite leather 1. Name and appearance of the product. 2. For composite leather: the quantitative and qualitative composition of the materials from which the products are made. 3. Availability of natural fur parts, name and size. For products made of combined materials 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 134
1 420500 Other articles of genuine leather or composition leather 1. Name and appearance of the product. 2. Scope. 3. The presence of parts from other materials. 4. For combined products: indicate which material dominates the surface area. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 135
1 4206000000 Articles of gut (other than silkworm gut), of goldbeater's skin, bladders or tendons 1. Name and purpose of the goods. 2. The composition of the materials from which the products are made. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 136
1 4301 Fur raw material (including heads, tails, paws and other parts or trimmings suitable for the manufacture of fur products) 1. Species, subspecies and breed of animals from which the skins are obtained. 2. Technology for obtaining raw materials, including a description: whole, with or without a head, tail and paws, collected or not collected, or parts of the skin. 3. For cuts and parts: suitability assessment for 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 137
1 4302 Tanned or dressed fur skins (including heads, tails, paws and other parts or patch), unassembled or assembled (without adding other materials) 1. Species, subspecies and breed of animals from which the skins are obtained. 2. Technology of processing and additional finishing of fur skins, including a description of the whole skin or part, the name of the part of the skin (for example, tails), cut into a certain shape or assembled into 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 138
1 4303 Articles of apparel, clothing accessories and other articles of natural fur 1. Name of an item or accessory to clothing, other products. 2. Name and type of animals from which the skins were obtained. 3. For children's clothing: height and bust. 4. The presence of other materials, their shape, size, purpose. For products from different 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 139
1 4304000000 Artificial fur and articles thereof 1. Quantitative and qualitative composition of materials. 2. Method for obtaining pile and warp. 3. The method of fastening the pile and the base. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 140
1 4401 Wood fuel in the form of logs, logs, twigs, bundles of brushwood or in similar forms. wood chips or shavings. Sawdust and wood waste and scrap, whether or not agglomerated in the form of logs, briquettes, pellets or similar forms. 1. Type of wood. 2. The type in which fuel wood is presented (logs, logs, branches, brushwood, chips, shavings, sawdust, wood waste, etc., from those listed in the names of subheadings of heading 4401 of the TN VED CU). 3. Technology received 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 141
1 4403 Wood products in the rough, whether or not bark or sapwood removed, or roughly squared or unlogged 1. Name and purpose of timber, breed and type of wood, Latin name. 2. Technology for obtaining timber, including the presence of surface mechanical treatment (in accordance with the texts of sub-subheadings). 3. Timber dimensions 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 142
1 440310000 Timber treated with paint, stains, creosote or other preservatives 1. Type of wood. 2. The presence of treatment with a preservative (for example, paint, etchants, creosote or other substances), composition. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 143
1 4404 Cooperage wood. The logs are split. Piles, stakes and poles of wood, pointed but not sawn lengthwise. Wood, roughly hewn, but not turned, bent or otherwise worked, of a kind used for the manufacture of canes, umbrellas 1. Type of wood. 2. Technology of obtaining and processing (turning, sharpening, etc.). 3. Appearance. 4. Purpose of the goods. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 145
1 4407 Timber sawn or split lengthwise, sliced ​​or peeled, planed or not planed, sanded or not sanded, end-jointed or not, with a thickness exceeding 6 mm (except timber sawn or split along 1. Name and purpose of timber, breed and type of wood, Latin name. 2. Processing technology (sawn lengthwise or split, planed or peeled, ground or unsanded, with or without end connections). 3. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 146
1 4408 Sheets for cladding, including those obtained by splitting laminated wood, for plywood or similar laminated wood and other timber, sawn lengthwise, layered or peeled, planed or rough, sanded or not sanded 1. The name of the breed and the purpose of the goods. For products made of tropical wood, in addition to the species, indicate the type and Latin name. 2. Manufacturing technology, including the type of processing (sawn lengthwise or split, planed or peeled, sanded 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 147
1 4409 Sawn timber (including planks and frieze for parquet flooring, not assembled) in the form of profiled wood (tongue, groove, tongue and groove, chamfered, semi-circular grooving, shaped, rounded or similar) according to 1. Name and purpose of the product (for example, plank, bar, frieze). 2. Type and type of wood. 3. Description of the technology, including mechanical processing of lumber along the face and / or edge (for example, planed and / or polished) type of connection using 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 148
1 4410 Particle boards, oriented chips (OSB) and similar plates (for example, wafer plates) of wood or other woody materials, whether or not impregnated with resins or other organic binders 1. Name and structure of the plate (for example, waffle plate). 2. Manufacturing technology, processing of boards (for example, a raw board, a polished board or a board with a surface covered with a film material), edges and ends (for example, the ends of boards 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 149
1 4411 Fiber boards from wood or other lignified materials with or without the addition of resins or other organic substances 1. Technology indicating the manufacturing method (wet or dry) and the processing of edges and ends, the presence of structural features (for example, the ends of the plates have grooves and ridges along the length). 2. For MDF: fibreboard thickness (in mm). 3. Density t 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 150
1 4412 Plywood, veneered panels and similar laminated wood materials: 1. Product name. 2. Number of layers, thickness (in mm) and type of wood for each layer. 3. Type of processing of edges and ends or the presence of structural features (for example, the ends of the plates along the length have grooves and ridges). 4. For squared, multi-layered 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 151
1 4418 Joinery and carpentry of wood, construction, including cellular wood panels, assembled flooring panels, shingles and shakes 1. Name of the product and indication of the type of wood from which the product is made. 2. Description of the manufacturing technology, the presence of structural features (for example, the presence of several layers, the method of fastening, profiled edges, elements for connecting 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 152
1 47 Pulp of wood or other fibrous cellulosic materials. Recyclable paper or cardboard (waste paper and waste) 1. Quantitative and qualitative composition of raw materials, indicating the type of wood used. 2. Technology, including methods for obtaining, processing / refining the mass, a method for processing a fibrous semi-finished product (in order to increase the whiteness of the finished product) 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 153
1 4805 Other uncoated paper and paperboard, in rolls or sheets, not further processed or processed as specified in note 3 to this chapter 48 TN VED CU 1. Name and purpose of paper or cardboard. 2. Description of the production technology; if there are several layers, indicate the number and method of bonding the layers (for example, pressed in a wet state). 3. Quantitative and qualitative fibrous 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 154
1 480700 Paper and paperboard, multi-layered (made by gluing flat layers of paper or paperboard with an adhesive) without surface coating or impregnation, whether or not reinforced, in rolls or sheets 1. Name and purpose of paper or cardboard. 2. Description of the production technology; if there are several layers, indicate the number and method of bonding the layers (glued with adhesive or pressed when wet). 3. Quantitative and quality 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 155
1 481092 Other paper and paperboard, multilayer and other 1. Manufacturing technology by layers, indicating the presence and number of layers containing bleached / bleached fibers (for example, the mass or part of it (in wt.%) was subjected to bleaching, dyeing, etc.), the method of bonding the layers. 2. Qualitative and quantitative 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 156
1 481099 Other paper and paperboard, multilayer and other 1. Manufacturing technology by layers, indicating the presence and number of layers containing bleached / bleached fibers (for example, the mass or part of it (in wt.%) was subjected to bleaching, dyeing, etc.), the method of bonding the layers. 2. Qualitative and quantitative 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 157
1 481890 Other household, sanitary and hygienic or medical products 1. Product name. 2. Manufacturing technology and composition of materials used for manufacturing. 3. Appearance of packaging and intended use (for example, retail or non-retail). 4. Purpose or scope (characteristic 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 158
1 4820500000 Albums for samples or collections 1. Cover material. 2. The material from which the sheets are made. 3. Album dimensions (in cm). 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 159
1 4820900000 Photo albums 1. Cover material. 2. The material from which the sheets are made. 3. Album dimensions (in cm). 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 160
1 4821 Labels and labels of all kinds, of paper or paperboard, printed or unprinted 1. The composition and structure of the material from which the label or label is made, self-adhesive or non-self-adhesive. 2. The presence of printed text, for which product it is intended. 3. Shape and dimensions. 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 161
1 4902 Newspapers, magazines and periodicals, whether or not illustrated, whether or not containing advertising material 1. The name of the periodical printed edition and the frequency of publication. 2. The method of applying the image and text. 3. The presence of binding. 4. Availability and volume of promotional material. 5. If there is an application, indicate its belonging to a specific 1. Certificate of registration of the mass media (if the print periodical is subject to registration) or 2. Permission to distribute the products of foreign print periodicals in the territory of the Russian Federation or from a foreign trade participant. 162
1 5603 Nonwovens, whether or not impregnated, coated or non-coated, covered or laminated 1. Product name. 2. The composition and method of manufacturing non-woven material, indicating the method of bonding the fibers. 3. Quantitative and qualitative composition of textile material and coating material. 4. Surface density of the material (g/m2). 5. Pr 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 163
1 5903 Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902 1. Product name. 2. Quantitative and qualitative composition of the textile base (wt.%). 3. The method of manufacturing the textile base (for example, woven, knitted fabric) and the description of the finish of the textile material (solid dyed, the presence of printed 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 164
1 601 Bulbs, tubers, tuberous roots, corms, rhizomes, including branched ones, in a state of vegetative dormancy, vegetation, or flowering. Plants and roots of chicory, other than those of heading 1212 1. Plant name, botanical species, genus (Latin name). 2. State (rest, vegetation, flowering). 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 11
1 602 Other living plants 1. Name and type of plant. 2. Grafted or not grafted, rooted or unrooted. 3. Plant for open ground, or for protected ground. 4. Plant, cuttings, or layering. 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 12
1 603 Cut flowers and buds 1. Plant name, botanical species. 2. The presence of flowers or buds. 3. Fresh or dried. 4. Types of processing (for 0603 90 000 0). 5. Application (for making bouquets or for decorative purposes). 1. Acts of examinations. or 2. Test reports. or 3. Certificates of laboratory analysis. 13
1 64 Shoes, leggings and similar articles; their details 1. Design features. 2. Name (type) of footwear. 3. The method of fastening the upper and sole. 4. Upper and sole materials. 5. Insole size. 6. Age group (children, adults). 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 165
1 6806 Mixtures and products from mineral and vegetable materials 1. The content (in wt.%) of mineral and plant components in the material of the product. 2. The degree of processing of the material. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 166
1 6808 Mixtures and products from mineral and vegetable materials 1. The content (in wt.%) of mineral and plant components in the material of the product. 2. The degree of processing of the material. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 167
1 6815910000 Mineral products 1. Quantitative and qualitative composition of the material of the product (in wt.%), indicating the names of minerals. 2. The degree of processing of the material. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 168
1 6902 Refractory ceramic products 1. The presence of firing products. 2. Quantitative and qualitative (content of chemical elements in terms of oxides) composition of the product material (wt.%). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 170
1 6903 Refractory ceramic products 1. The presence of firing products. 2. Quantitative and qualitative (content of chemical elements in terms of oxides) composition of the product material (wt.%). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 171
1 7002 Glass and glass products 1. Type of glass (eg borosilicate, fused silica). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 172
1 7017 Glass and glass products 1. Type of glass (eg borosilicate, fused silica). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 173
1 7019 Fiberglass and products from it 1. Product width (cm). 2. Cell size for fiberglass meshes. 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 174
1 702000 Glass and glass products 1. Type of glass (eg borosilicate, fused silica). 1. Expert opinion (examination certificate) or a certificate of analysis of the goods, or a quality passport for the goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 175
1 7201 Cast iron and mirror cast iron in ingots, ingots or other primary forms 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 176
1 7202 Ferroalloys 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 177
1 7204 Waste and scrap of ferrous metals. Ferrous metal ingots for remelting (charge ingots) 1. Conclusion of an expert organization on the possibility of using the product in the capacity for which it is intended. 2. In what form the goods are presented for customs clearance. 1. Photos. 2. Expert opinion (examination report). 178
1 7205 Granules and powders from limiting and mirror cast iron, ferrous metals 1. Material of manufacture. 2. The percentage of the product by weight, which is sifted through a sieve with a mesh size of 1 mm and a mesh size of 5 mm. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 179
1 7207 Semi-finished products of iron or non-alloy steel 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 180
1 7208 Flat-rolled products of iron or non-alloy steel, 600 mm wide or more, hot-rolled, unclad, not plated or otherwise coated 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 181
1 7209 Flat-rolled products of iron or non-alloy steel, 600 mm wide or more, cold-rolled (cold-reduced), unclad, not plated or otherwise coated 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 182
1 7210 Flat-rolled products of iron or non-alloy steel, width 600 mm or more, clad, galvanized or otherwise coated 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 183
1 7211 Flat-rolled products of iron or non-alloy steel, less than 600 mm wide, unclad, not plated or otherwise coated 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 184
1 7212 Flat-rolled products of iron or non-alloy steel less than 600 mm wide, clad, galvanized or otherwise coated 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 185
1 7213 Hot-rolled bars in loose coils of iron or non-alloy steel 1. Chemical composition of the material as a percentage. 2. Diameter, manufacturing method. 3. In what form these products are delivered at the time of customs clearance. 4. Material for the manufacture of products. 5. Scope. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 186
1 7214 Bars of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, including rods twisted after rolling, other 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 187
1 7215 Other bars of iron or non-alloy steel 1. Product height. 2. Manufacturing method. 3. In what form these products are delivered at the time of customs clearance. 4. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 188
1 7216 Corners, shapes and special profiles made of iron or non-alloy steel 1. Chemical composition of the material as a percentage. 2. Manufacturing method. 3. In what form these products are delivered at the time of customs clearance. 4. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the production technology of the goods., 2. Expert opinion (examination certificate). 189
1 7217 Iron or non-alloy steel wire 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 190
1 7218 Stainless steel in ingots or other primary forms. Semi-finished products made of stainless steel 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 191
1 7219 Flat-rolled products of stainless steel, width 600 mm or more  1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 192
1 7220 Flat-rolled products made of corrosion-resistant steel, less than 600 mm wide 1. Chemical composition of the material as a percentage. 2. Thickness, width of the product. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 193
1 7221 Hot-rolled bars, in loose coils, from corrosion-resistant steel 1. Chemical composition of the material as a percentage 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 194
1 7222 Other bars of stainless steel. Corners, shaped and special profiles made of stainless steel 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 195
1 7224 Other alloyed steel in ingots or other primary forms. Semi-finished products from other alloy steels 1. Chemical composition of the material as a percentage. 2. Manufacturing method. 3. In what form these products are delivered at the time of customs clearance. 4. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 196
1 7225 Flat-rolled products of other alloy steels, width 600 mm or more 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 197
1 7226 Flat-rolled products of other alloy steels, less than 600 mm wide  1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. The presence of galvanization and the method of galvanizing. 5. In what form these products are delivered at the time of customs clearance. 6. Material of manufacture 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 198
1 7227 Hot-rolled bars, in loose coils, of other alloy steels 1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 199
1 7228 Other bars of other alloy steels. Corners, shaped and special profiles, from other alloyed steels. Hollow bars for drilling operations made of alloyed or non-alloyed steel  1. Chemical composition of the material as a percentage. 2. Product thickness. 3. Manufacturing method. 4. In what form these products are delivered at the time of customs clearance. 5. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 200
1 7229 Wire of other alloy steels 1. Chemical composition of the material as a percentage. 2. Manufacturing method. 3. Material for the manufacture of products. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 201
1 7302 Ferrous metal products used for railway or tram tracks: rails, counter-rails and cog rails, transfer rails, blind crosses, transfer rods and other cross connections, sleepers, butt plates and connections 1. Mass of a linear meter. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 202
1 7304 Pipes, tubes and profiles are hollow, seamless, of ferrous metals (except for cast iron) 1. Chemical composition of the material as a percentage. 2. Outer diameter of the pipe. 3. Impact strength of steel. 4. Minimum yield strength (MPa). 5. The presence of a connection and its type (threaded lock, sleeveless, etc.). 6. Ability to work with 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 3. Factory test certificate. 203
1 7305 Other pipes and tubes (for example, welded, riveted or similarly joined), of circular cross section, of an outer diameter exceeding 406,4 mm, of iron or steel 1. Chemical composition of the material as a percentage. 2. Strength limit. 3. Ability to work at specified temperatures and / or in an environment containing hydrogen sulfide (H2S). 4. In what form are delivered at the time of customs clearance. 5. Region n 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 3. Factory test certificate. 204
1 7306 Pipes, tubes and other hollow profiles (for example, open-seam or welded, riveted or similarly joined), of iron or steel 1. Chemical composition of the material as a percentage. 2. Wall thickness. 3. Strength limit. 4. Section shape. 5. The presence of cut threads. 6. Ability to work at specified temperatures and / or in an environment containing hydrogen sulfide (H2S). 7. To 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 3. Factory test certificate. 205
1 7308 Ferrous metal structures (other than prefabricated building structures of heading 9406) and parts thereof (for example, bridges and their sections, lock gates, towers, lattice masts, roof decks, trusses, doors and windows and their frames, thresholds, etc. 1. Material of manufacture. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 206
1 7312 Stranded wire, cables, ropes, braided cords, slings and the like, of iron or steel, not electrically insulated 1. Material of manufacture, coating material. 2. The maximum size of the cross section. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 207
1 7314 Metallic fabric (including endless bands), gratings, nets and fences made of wire, of ferrous metals. Expanded metal sheet 1. The maximum size of the cross section. 2. Cell size. 3. Manufacturing method, coated or uncoated. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 208
1 7315 Chains and their parts, of ferrous metal 1. The maximum size of the cross section. 2. Scope. 3. The presence of buckets, scrapers, other devices in the chain 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 209
1 7317 Nails, tacks, thumbtacks, grooved nails, staples (other than those of heading 8305) and the like, of iron or steel, with or without heads, of other materials, other than those with copper heads 1. Chemical composition of the material as a percentage. 2. Material of manufacture, method of manufacture. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 210
1 7318 Screws, bolts, nuts, capercaillie, screw hooks, rivets, cotter pins, cotter pins, washers (including spring washers) and the like, of iron or steel 1 area of ​​use. 2. The thickness of the rod. 3. Tensile strength. 4. Material of manufacture. 5. Inner diameter. 5. Type of the head, the presence of a headrest and its type, the presence of flanges, collars, the type of the end of the rod, the presence of additional elements 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Appearance (photographs, drawings) indicating design features. 3. Expert opinion (examination report). 211
1 7320 Springs, springs and sheets therefor, of ferrous metal 1. Purpose of the imported goods. 2. Processing method. 3. Material of manufacture. 1. For goods intended for industrial assembly of vehicles - a letter from the authorized body on the intended purpose of the imported goods. 2. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 3. Conclude 212
1 7322 Radiators for central heating with non-electric heating and parts thereof, of ferrous metal. Air heaters and distribution devices for supplying hot air (including devices for supplying also fresh or conditioned air) with 1. Material of manufacture. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 213
1 7325 Other cast products of ferrous metals 1. Material of manufacture. 2. Scope. 3. Manufacturing method. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 214
1 7326 Other articles of ferrous metal 1. Material of manufacture. 2. Manufacturing method. 3. Scope. (appointment). 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 215
1 7408 Copper wire 1. The maximum size of the cross section. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 216
1 7409 Plates, sheets and strips or strips of copper, with a thickness exceeding 0,15 mm 1. Material of manufacture. 2. In what form are delivered at the time of customs clearance. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 217
1 7411 Copper pipes and tubes 1. Wall thickness. 2. Material of manufacture. 3. Are the pipes straight. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 218
1 7604 Aluminum bars and profiles 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 219
1 7605 Aluminum wire 1. Chemical composition of the material as a percentage. 2. Maximum cross-sectional dimension in mm. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 220
1 7606 Plates, sheets, strips or strips of aluminum with a thickness exceeding 0,2 mm 1. Chemical composition of the material as a percentage. 2. Manufacturing method. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 221
1 7608 Aluminum pipes and tubes 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 222
1 7801 Lead, unwrought 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer of the product containing its description, information about the chemical composition of the product. 2. Expert opinion (examination report). 223
1 7804 Lead plates, sheets, strips or strips and foils. Lead powders and flakes 1. Thickness (excluding base) 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 224
1 7901 Zinc raw 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer of the product, containing its description, information about the chemical composition of the product. 2. Expert opinion (examination report). 225
1 8101 Tungsten and articles thereof, including waste and scrap 1. Manufacturing method. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 226
1 8102 Molybdenum and articles thereof, including waste and scrap 1. Manufacturing method. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 227
1 8103 Tantalum and articles thereof, including waste and scrap 1. Manufacturing method. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 228
1 8104 Magnesium and articles thereof, including waste and scrap 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 229
1 8108 Titanium and articles thereof, including waste and scrap 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 230
1 8112 Beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium, thallium and articles thereof, including waste and scrap 1. Chemical composition of the material as a percentage. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 231
1 8201 Hand tools: bayonet and shovel shovels, hoes, picks, choppers, pitchforks and rakes. Axes, bill hooks and similar cutting tools. Secateurs of all kinds. Scythes, sickles, hay knives, garden shears, wedges for splitting wood and others 1 area of ​​use. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 2. Expert opinion (examination report). 232
1 8207 Interchangeable working tools for hand tools, with or without mechanical drive, or for machine tools (e.g. for pressing, punching, punching, tapping, drilling, boring, broaching, milling, turning or screwdriving 1. Purpose of the goods 2. Material for the manufacture of the working part 1. The manufacturer's technical documentation containing a description of the production technology of the goods, purpose, material of manufacture (including the working part), appearance (photographs, drawings). 2. Expert opinion (examination report). 233
1 8208 Knives and cutting blades for machines or mechanical appliances 1 area of ​​use. 1. Technical documentation of the manufacturer, containing a description of the product, appearance, scope. 2. Information about machines and mechanical devices (for example, technical data sheets, instructions for use), confirming the ownership of knives and 234
1 8301 Padlocks and mortise locks (operating with a key, combination or electric), of base metal. Latches and frames with latches combined with locks, of base metal. Keys for any of the above items, non-precious 1 area of ​​use. 2. Purpose. 3. Processing method. 4. Material of manufacture. 1. For goods intended for industrial assembly of vehicles - a letter from the authorized body confirming the intended purpose of the imported goods. 2. Technical documentation of the manufacturer, containing a description of the production technology of goods 235
1 8302 Fasteners, fittings and similar articles, of base metal, of a kind used for furniture, doors, stairs, windows, curtains, vehicle interiors, saddlery, suitcases, boxes, caskets or similar articles. Hat hangers, cr 1 area of ​​use. 2. Purpose. 3. Processing method. 4. Material of manufacture. 1. For goods intended for industrial assembly of vehicles - a letter from the authorized body confirming the intended purpose of the imported goods. 2. Technical documentation of the manufacturer, containing a description of the production technology of goods 236
1 8309 Corks, caps and closures (including crown caps, screw caps and stoppers with a pouring device), bottle caps, cut corks, cork shells, sealing and other packaging accessories, of non-precious 1. Material of manufacture. 2. Diameter. 1. Technical documentation of the manufacturer, containing a description of the technology for the production of goods. 3. Expert opinion (examination report). 237
1 8402 Steam boilers or other steam generating boilers (other than central heating water boilers capable of also producing low pressure steam). Water boilers with superheater 1. Productivity of boilers (t steam per hour). 2. Purpose. 3. Type of boiler (for example, steam, water with a superheater, etc.). 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. For steam boilers for ships 238
1 8403 Central heating boilers other than those of heading 8402 1 area of ​​use. 2. Working principle. 3. Specifications. 4. The material from which the boiler is made. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 239
1 8406 Steam turbines and other steam turbines 1 area of ​​use. 2. Turbine power (MW). 3. Working principle. 4. Specifications. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 240
1 8407 Spark ignition internal combustion engines with rotary or reciprocating piston motion 1. Scope of the engine (aviation, marine, etc.). 2. Engine cylinder displacement (cc). 3. Engine power (kW). 4. For bus engines: information on the number of people, including the driver, for the carriage of which the 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. For motors for industrial 241
1 8408 Compression ignition piston internal combustion engines (diesels or semi-diesels) 1. Scope of the engine (aviation, marine, etc.). 2. Engine power (kW). 3. For bus engines: information on the number of people, including the driver, for the transport of which the bus is intended. 4. The degree of engine wear (new, used 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. For motors for industrial 242
1 8410 Hydraulic turbines, water wheels and regulators for them 1 Power (kW). 2. Working principle. 3. Specifications. 4. For parts, material of manufacture. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 243
1 8411 Turbojet and turboprop engines, other gas turbines 1. Engine type (turbojet, turboprop, etc.). 2. Engine thrust (kN). 3. Engine power (kW). 4. Scope. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 244
1 8412 Other engines and power plants 1. Engine type (jet, hydraulic, etc.). 2. For power plants and engines (hydraulic and pneumatic): scope, principle of operation (linear action (cylinders), etc.). 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 245
1 8413 Liquid pumps with or without flow meters. Liquid lifters 1. Scope of the pump (for civil aviation, for fuels and lubricants at gas stations or in garages, fuel, oil or coolant for internal combustion engines, etc.). 2. The presence of a flow meter. 3. Type on 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. For industrial pumps 246
1 8414 Air or vacuum pumps, air or gas compressors and fans. Ventilation or recirculation fume hoods or cabinets with fan, with or without filters 1. Scope of pump, compressor, fan (for civil aviation, manual for bicycles, in refrigeration equipment, roof, exhaust, wall, etc.). 2. Type of pump (vacuum, manual, foot, etc.). 3. Compressor type (hermetic, 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 247
1 8415 Systems for air conditioning, motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity can not be separately regulated 1 area of ​​use. 2. Complete set (composition) of the air conditioner. 3. Description of the functions performed (humidity change, temperature change, etc.) 4. Description of the principle of air temperature change and the principle of air humidity change. 5. Availability of 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. For industrial air conditioners 248
1 8416 Furnace burners for liquid fuel, atomized solid fuel or gas. Mechanical fireboxes, including their mechanical grates, mechanical ash collectors and similar appliances 1. For burners: type of fuel, equipment (composition). 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, the principle of operation, technical characteristics. 2. Expert opinion (examination report). 249
1 8417 Furnaces and furnaces, industrial or laboratory, including incinerators, non-electric 1. Purpose and type of furnace. 2. Heating method. 3. The design of the furnace (presence of a boiler, its type, etc.). 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 250
1 8418 Refrigerators, freezers and other refrigeration or freezing equipment, electrical or other types. Heat pumps other than air-conditioning units of heading 8415 1. Scope of refrigeration equipment (household, for the brewing industry, etc.). 2. Type of refrigeration equipment (freezer, refrigerator, freezer, etc.). 3. The design of refrigeration equipment. 4. Refrigerator capacity 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. A copy of the technical data tag located on the body of the ho 251
1 8419 Machinery, industrial or laboratory equipment, electrically or non-electrically heated (excluding ovens, chambers and other apparatus of heading 8514) for the treatment of materials in a temperature-varying process such as heating, boiling, roasting 1. Scope of equipment (for agricultural products, for the medical industry, for civil aviation, etc.). 2. Design. 3. Appointment. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. For industrial equipment 252
1 8420 Calenders or other rolling machines, other than metal or glass working machines, and rolls therefor 1. Scope (for the textile industry, for the paper industry). 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 253
1 8421 Centrifuges, including centrifugal dryers. Equipment and devices for filtering or purifying liquids or gases 1. Scope (for civil aviation, for the medical industry, etc.). 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 254
1 8422 Dishwashers. Equipment for washing or drying bottles or other containers. Equipment for filling, sealing bottles, jars, closing boxes, bags or other containers, for sealing or labeling them. Equipment for hermetic 1 area of ​​use. 2. For equipment for filling, packaging, blocking - productivity (pieces / hour, pieces / min). 3. Availability of additional functions. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. For medical equipment 255
1 8423 Weighing equipment (other than balances with a sensitivity of 0,05 g or better), including counting or checking machines powered by the gravity of the load to be weighed. Weights for scales of all types 1. Appointment of scales (household, for weighing people, for continuous weighing of products on conveyors). 2. Maximum weighing weight. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 256
1 8424 Mechanical devices (with or without manual control) for throwing, spraying or dispersing liquids or powders. Fire extinguishers charged or uncharged. Pulverizers and similar devices. Steam or sandblasting and similar 1. Scope, purpose of devices, design (composition). 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 257
1 8425 Lifting hoists and hoists, except for skip hoists. Winches and capstans. jacks 1 area of ​​use. 2. Drive type. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 258
1 8426 Ship derrick cranes. Cranes, including cable cranes. Mobile lifting trusses, straddle carriers and trolleys equipped with a crane 1. Load capacity (t). 2. Purpose and scope. 3. Availability of auxiliary devices. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 259
1 8465109000 Machine tools capable of performing various machining operations without changing tools between these operations with automatic movement of the workpiece between operations 1. Appointment. 2. Working principle. 3. The presence of automatic movement of the workpiece, the presence of machining without changing tools. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. A video clip demonstrating the automatic movement of the processing 260
1 8501 Electric motors and generators (excluding generating sets) 1. Engine power (kW) generator (kVA). 2. Current type (eg AC, DC) 3. Motor type (synchronous, asynchronous, single-phase, multi-phase). 4. The height of the axis of rotation. 5. Scope (for civil aviation, etc.). 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, principle of operation, technical characteristics. 2. Photos of tags with technical characteristics. 3. Expert opinion (examination report). 261
1 8541 Diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, including photovoltaic cells, assembled or not assembled in modules, mounted or not mounted in panels; light emitting diodes; piezo 1. Type of semiconductor. 2. Common name. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, principle of operation, technical characteristics. 2. Expert opinion (examination report). 262
1 8545 Carbon electrodes, carbon brushes, lamp or battery carbons and articles of graphite or other forms of carbon, with or without metal, of a kind used in electrical engineering 1. Scope of application (for example, in furnaces, for electrolysis installations). 2. Composition. 3. For electrodes used in furnaces (shape, cross-sectional view, diameter for round cross-section (mm), cross-sectional area (except for round) (cm 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, principle of operation, technical characteristics, scope and composition. 2. Expert opinion (examination report). 3. Description of the installation method (mounting 263
1 8701 Tractors (except tractors of heading 8709) 1. Appearance. 2. Moment of release of t.s. 3. Engine power (kW). 4. Ecological class. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. Vehicle Type Approval 264
1 8702 Motor vehicles designed to carry 10 persons or more, including the driver 1. Appearance. 2. Moment of release of t.s. 3. Engine type (gasoline/diesel). 4. The working volume of the engine cylinders. 5. Gross weight tf. 6. Carrying capacity. 7. Maximum driving speed. 8. Number of seats including the driver. nine. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. Vehicle Type Approval 265
1 8703 Cars and other motor vehicles primarily intended for the transport of persons (other than motor vehicles of heading 8702), including vans and racing cars 1. Appearance. 2. Moment of release of t.s. 3. Engine type (gasoline/diesel). 4. The working volume of the engine cylinders. 5. Gross weight tf. 6. Carrying capacity. 7. Maximum driving speed. 8. Number of seats including the driver. nine. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. Vehicle Type Approval 266
1 8703211091 Four-wheeled off-road motor vehicles with two or four driving wheels, equipped with a motorcycle (saddle) type seat, manual steering levers for two front wheels, off-road tires, with 1. Appearance. 2. Moment of release of t.s. 3. Engine type (gasoline/diesel). 4. The working volume of the engine cylinders. 5. Gross mass t.s., mass net. 6. Possibility of inclusion of a backing 7. Loading capacity. 1. Technical documentation of the manufacturer, containing its description, photographs, drawings, manufacturing flow charts, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. Vehicle Type Approval 267
1 8704 Motor vehicles for the transport of goods 1. Appearance. 2. Moment of release of t.s. 3. Engine type (gasoline/diesel). 4. The working volume of the engine cylinders. 5. Gross weight tf. 6. Carrying capacity. 7. Maximum driving speed. 8. Number of seats including the driver. nine. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. Vehicle Type Approval 269
1 8705 Motor vehicles for special purposes, other than those used for the transport of passengers or goods (e.g. emergency trucks, truck cranes, fire trucks, concrete mixer trucks, road cleaning vehicles, watering machines, 1. Appearance. 2. Moment of release of t.s. 3. Engine type (gasoline/diesel). 4. The working volume of the engine cylinders. 5. Gross weight tf. 6. Carrying capacity. 7. Maximum driving speed. 8. Number of seats including the driver. nine. 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 3. Vehicle Type Approval 270
1 8716 Trailers and semi-trailers; other non-self-propelled vehicles; their parts 1. Purpose (for example, for living, for transporting goods). 2. Number of years since issue. 3. Overall dimensions (m) (including length including protruding elements). 4. Gross weight (t). 5. Availability of refrigeration unit 1. Technical documentation of the manufacturer of the goods, containing its description, photographs, drawings, technological schemes for manufacturing, principle of operation, technical characteristics. 2. Expert opinion (examination report). 271
1 9004 Spectacles, goggles and similar devices, corrective, protective or other 1 area of ​​use. 2. Material of manufacture. 3. Type of insert (eg lens, protective shield). 4. Insert material. 3. Presence of corrective function and sunscreen properties in glasses. 4. Cost on the terms of the French border of the country of entry 1. Technical documentation of the manufacturer of the product, containing its description, photographs, characteristics, purpose, information about the material of manufacture of the frame and insert. 2. Copies of the image of the label or marking contained on the original packaging 272
1 9019109001 Whirlpool bathtubs and showers 1. Indicate the presence or absence (built-in pump used to create water and air-water jets under pressure). 1. Instructions for use 2. Manufacturer's technical documentation containing the assembly diagram and package contents 3. Copies of the image of the label (label) or markings contained on the original packaging and product. 273
1 940350000 Wooden furniture 1 area of ​​use. 2. The material from which the product is made. 3. Cost on the terms of the Franco-border of the country of import 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 274
1 940360100 Wooden furniture 1 area of ​​use. 2. The material from which the product is made. 3. Cost on the terms of the Franco-border of the country of import 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 275
1 940360900 Wooden furniture 1 area of ​​use. 2. The material from which the product is made. 3. Cost on the terms of the Franco-border of the country of import 1. The manufacturer's technical documentation containing a description of the technology for the production of goods (for example, standards, regulations, specifications, other regulatory documentation). or 2. The conclusion of an expert (examination report) or a specialist (protocol of the 276