MENU

Description of typical conformity declaration schemes

1d Declaration Schema

The 1d schema includes the following procedures:

  • formation and analysis technical documentation;
  • implementation of production control;
  • testing of product samples;
  • acceptance and registration of the declaration of conformity;
  • drawing a single sign of appeal.

The applicant takes all necessary measures to ensure that the production process is stable and ensures that the manufactured products comply with the technical regulations, generates technical documentation and analyzes it.

The applicant provides production control.

In order to control the compliance of products with the requirements of technical regulations, the applicant conducts tests of product samples. Tests of product samples are carried out at the choice of the applicant in a testing laboratory or an accredited testing laboratory.

The applicant draws up a declaration of conformity and registers it according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

2d Declaration Schema

The 2d schema includes the following procedures:

  • the formation and analysis of technical documentation;
  • testing of a batch of products (single product);
  • acceptance and registration of the declaration of conformity;
  • drawing a single sign of appeal.

The applicant generates technical documentation and conducts its analysis.

The applicant conducts testing of product samples (single product) to ensure confirmation of the declared conformity of products with the requirements of technical regulations. Tests of product samples (single product) are conducted at the choice of the applicant in a testing laboratory or an accredited testing laboratory.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

3d Declaration Schema

The 3d schema includes the following procedures:

  • the formation and analysis of technical documentation;
  • implementation of production control;
  • testing of product samples;
  • acceptance and registration of the declaration of conformity;
  • drawing a single sign of appeal.

The applicant takes all necessary measures to ensure that the production process is stable and ensures that the manufactured products comply with the technical regulations, generates technical documentation and analyzes it.

The applicant provides production control.

In order to control the compliance of products with the requirements of technical regulations, the applicant conducts tests of product samples. Tests of product samples are carried out in an accredited testing laboratory.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

4d Declaration Schema

The 4d schema includes the following procedures:

  • the formation and analysis of technical documentation;
  • testing of a batch of products (single product);
  • acceptance and registration of the declaration of conformity;
  • drawing a single sign of appeal.

The applicant generates technical documentation and conducts its analysis.

The applicant conducts testing of product samples (single product) to ensure confirmation of the declared conformity of products with the requirements of technical regulations. Tests of product samples (single product) are carried out in an accredited testing laboratory.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

5d Declaration Schema

The 5d schema includes the following procedures:

  • the formation and analysis of technical documentation;
  • implementation of production control;
  • conducting research (testing) type;
  • acceptance and registration of the declaration of conformity;
  • drawing a single sign of appeal.

The applicant takes all necessary measures to ensure that the production process is stable and ensures the declared compliance of the manufactured products with the technical regulations, generates technical documentation and analyzes it.

The applicant provides production control.

The product certification body (accredited testing laboratory), in accordance with its scope of accreditation and on behalf of the applicant, conducts a study of the type of products in one of the following ways:

  • research sample for the planned production as a typical representative of all future products;
  • analysis of technical documentation, testing of product samples or critical components of products.

The results of a type study are recorded in a conclusion (certificate of conformity) and (or) a protocol in which an accredited testing laboratory gives an assessment of the conformity of the type of product to the established requirements.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

6d Declaration Schema

The 6d schema includes the following procedures:

  • formation and analysis of technical documentation, which necessarily includes a certificate for the management system (copy of the certificate) issued by the certification body of management systems, confirming the compliance of the management system with the requirements defined in the technical regulations;
  • implementation of production control;
  • testing of product samples;
  • acceptance and registration of the declaration of conformity;
  • drawing a single sign of appeal;
  • control over the stability of the management system.

The applicant takes all necessary measures to ensure the stability of the management system and production conditions for the manufacture of products that meet the requirements of technical regulations, generates technical documentation and analyzes it taking into account the fact that one or more documents can be established in the technical regulation for which compliance management system certification.

The applicant provides production control and informs the certification body of management systems of all planned changes in the management system.

The applicant conducts testing of product samples. Tests of product samples are carried out in an accredited testing laboratory.

The applicant draws up a declaration of conformity and registers according to the notification principle.

The applicant shall apply a single mark of appeal, unless otherwise established by the technical regulations.

The management system certification body carries out inspection control over the operation of the certified management system.

If the results of the inspection control are negative, the applicant makes one of the following decisions:

  • suspend the declaration of conformity;
  • Cancel the declaration of conformity.

The applicant shall make an entry in the Unified Register of Issued Certificates of Conformity and Registered Declaration of Conformity issued in a single form.

Summary table of typical conformity declaration schemes
Circuit number Schema element Application Applicant Documents confirming compliance
Tests of production, the type of study Evaluation of the Production control
1D testing of product samples is carried out by the manufacturer - Production control by manufacturers For serial products Manufacturer of the State - Member of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union The declaration of conformity for batch production
2D batch testing of products (single product) is performed by the applicant - - For batch production (single product) Manufacturer, seller (supplier) of the State - Member of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union Declaration of Conformity for the production batch (single item)
3D testing of product samples in an accredited testing laboratory (center) - Production control by manufacturers For serial products Manufacturer of the State - Member of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union The declaration of conformity for batch production
4D batch testing of products (single product) in an accredited testing laboratory (center) - - For batch production (single product) Manufacturer, seller (supplier) of the State - Member of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union Declaration of Conformity for the production batch (single item)
5D type test - Production control by manufacturers For serial products Manufacturer of the State - Member of the Customs Union or a person authorized by a foreign manufacturer in the territory of the Customs Union The declaration of conformity for batch production
6D testing of product samples in an accredited testing laboratory (center) management system certification and inspection control by a management system certification body Production control by manufacturers The declaration of conformity for batch production